2026 Infiniti QX60 TSBs
8 manufacturer communications for the 2026 Infiniti QX60 sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2026 QX60 problem report covers complaints, recalls, and investigations.
What the bulletins cover
Service bulletins
ENGINE NO START WITH KEY SYSTEM ERROR AND DTC B2C20-24 STORED IN THE BCM IF YOU CONFIRM The customer states the engine will not start and “Key System Error” warning is displaying in the Information Display (Combination Meter) (Figure 1), AND DTC B2C20-24 for "STARTER CONTROL…
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of ITB26-002.
QUALITY ACTION CAMPAIGN BULLETIN Spare Tire Label Campaign ID: PD195 Date: April 30, 2026 Attention: Retailer Principal, Sales, Parts and Service Managers ***** Retailer Announcement ***** To ensure continued client satisfaction and confidence, INFINITI is conducting a Retailer…
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These…
FRONT FASCIA POPPING OUT NEAR HEADLAMP IF YOU CONFIRM The Front Bumper Fascia is detaching from the fender under the headlamp on one/or both sides. ACTION Refer to the SERVICE PROCEDURE in this bulletin to: 1. Remove the Front Bumper Fascia. 2. Replace the affected Headlamp…
FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove…
METAL TICKING NOISE AT B-PILLAR IF YOU CONFIRM A metallic ticking noise is coming from the driver (LH) side and/or passenger (RH) side B-Pillar when driving the vehicle on various road surfaces. ACTION Refer to the SERVICE INFORMATION in this bulletin to adjust the inner support…
VENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in “EVAP system close” in Work support. · After selecting the "EVAP system close" in Work support, the “VENT CONTROL/V” in Active test becomes non-functional…
Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.