2004 Ford Focus TSBs

60 manufacturer communications for the 2004 Ford Focus sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2004 Focus problem report covers complaints, recalls, and investigations.

60Communications

What the bulletins cover

Transmission & drivetrain16 bulletins
Engine14 bulletins
Electrical10 bulletins
Latches & locks5 bulletins
Suspension4 bulletins
Visibility & wipers4 bulletins

Most recent service bulletins

The 20 most recent of 60 communications on file. The complete set is searchable on NHTSA's page for this vehicle.

Engine SSM 46085 September 21, 2016

The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot…

Latches & locks 16-0067 April 21, 2016

For 2000-2005 Focus vehicles built on or before 1/26/2005 Safety Recall 05S27 has been issued for vehicles that are operated in high corrosion areas for an extended period, where the rear door latches may experience corrosion in the pawl pivot area preventing proper engagement…

Body & structure · Latches & locks TSB-14-0162 September 9, 2014

FORD: REAR DOOR LATCHES ARE EXPERIENCING CORROSION IN PAWL PIVOT AREA THAT PREVENT PROPER ENGAGEMENT OF PAWL INTO CATCH, WHEN OPERATED IN AREAS CAUSING HIGH CORROSION. MODEL 2000-05 FOCUS.

Suspension · Body & structure TSB-14-0163 September 9, 2014

FORD: DUE TO HIGH CORROSION AREAS, WHERE VEHICLES ARE OPERATED FOR EXTENDED PERIODS, LOWER CONTROL ARM (LCA) CAN SEPARATE FROM FORWARD ATTACHMENT OF SUBFRAME. MODEL 2001-04 ESCAPE.

Latches & locks TSB-14-0148 August 11, 2014

FORD: ON SOME VEHICLES, OPERATING FOR AN EXTENDED TIME IN HIGH CORROSION AREA, A SAFETY RECALL 05S27 WAS ISSUED, WHERE REAR DOOR LATCHES EXPERIENCE CORROSION IN PAWL PIVOT AREA PREVENTING PROPER ENGAGEMENT OF PAWL INTO CATCH. MODEL 2000-05 FOCUS.

Engine 06166 February 27, 2007

POSSIBLE ENGINE DAMAGE - INSTALL SPECIAL SERVICE TOOLS PRIOR TO REMOVING CRANKSHAFT PULLEY BOLT.

Service bulletin 05252 January 1, 2006

NEUTRAL TOW CAPABILITY -- SERVICE KIT REQUIREMENTS.

Electrical 19009 January 1, 2006

DTC P0316, P0300, P0301, P0302, P0303 AND/OR P0304 - SERVICE TIP.

Engine 19016 January 1, 2006

REPLACE TIMING BELT IDLER PULLEY DURING 2.0L ZETEC ENGINE CYLINDER HEAD REPLACEMENT - SERVICE TIP.

Engine 19026 January 1, 2006

MIRFIRE DIAGNOSTIC TROUBLE CODES P0316, P0300, P0301, P0302, P0303, OR P0304 - SERVICE TIP.

Engine 0627 January 1, 2006

MANIFOLD OR CATALYTIC CONVERTER HEAT SHIELDS LOOSE/MISSING.

Transmission & drivetrain 0645 January 1, 2006

NEUTRAL TOW CAPABILITY - SERVICE KIT REQUIREMENTS.

Engine 06116 January 1, 2006

POSSIBLE ENGINE DAMAGE - INSTALL SPECIAL SERVICE TOOLS PRIOR TO REMOVING CRANKSHAFT PULLEY BOLT - SERVICE TIP.

Transmission & drivetrain 0581 June 7, 2005

DIFFICULT OR UNABLE TO SHIFT INTO 5TH GEAR.

Brakes & stability 05105 June 7, 2005

REAR BRAKE SQUEAL.

Electrical 18581 April 1, 2005

ERRATIC INSTRUMENT CLUSTER GAUGES AND/OR WARNING INDICATORS - SERVICE TIP.

Transmission & drivetrain 18463 March 1, 2005

VENT LEAK.

Transmission & drivetrain 18477 March 1, 2005

HARSH TRANSMISSION ENGAGEMENT AND OR DTC P0705.

Seat belts 05310 February 21, 2005

SAFETY BELT WEB STOP BUTTON SERVICE.

Engine 18425 February 1, 2005

NO CRANK ON START CHARGING SYSTEM WARNING INDICATOR ON DRIVEABILITY CONCERNS AND OR MALFUNCTION INDICATOR LAMP ON.

← 2004 Focus problems All Focus TSB years
Data updated 2026-08-20 from NHTSA's public records

Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.