2023 Chevrolet Colorado TSBs
630 manufacturer communications for the 2023 Chevrolet Colorado sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2023 Colorado problem report covers complaints, recalls, and investigations.
What the bulletins cover
Warranty extensions, campaigns & software updates
Worth checking your VIN against — these can mean free or reimbursed work if your vehicle qualifies.
Certain vehicles may experience reduced or intermittent Telematics Control Module functionality. Dealers are to reprogram the Telematic Control Module to the latest software level.
General Motors has decided to conduct a Voluntary Emission Recall. Certain vehicles may have a condition which can cause the fuel pump power control module to fail. If this were to occur, fuel flow to the engine could be interrupted. Dealers will replace the fuel pump power…
Certain vehicles may have a condition in which the Engine Control Module (ECM) does not sufficiently control fuel injector flow rate under certain driving conditions. Dealers are to reprogram the ECM.
Certain vehicles listed above, may have a condition where coolant leaks from the radiator hose quick connect at the radiator inlet. This special coverage covers the condition described above for a period of 5 years or 60,000 miles (100,000 km), whichever occurs first, from the…
This update contains a required software change to help improve the overall software update and diagnostics process. Be sure to install this update to be able to receive future software updates.
• Fixes to help prevent loss of functionality for connectivity features such as OnStar, Wi-Fi, Navigation, and Super Cruise.
Certain vehicles listed above, may have a condition in which the Brake System Control Module does not have the latest software. Dealers are to reprogram the Brake System Control Module.
Certain vehicles, may have a condition in which the Brake System Control Module does not have the latest software. Dealers are to reprogram the Brake System Control Module.
Certain 2023-2024 model year Chevrolet Colorado / Silverado 1500 and GMC Canyon / Sierra 1500 vehicles equipped with a 2.7L engine (RPO L3B), may have an Engine Control Module (ECM) that does not sufficiently control fuel injector flow rate under certain driving conditions.…
Certain vehicles listed above may have a condition in which the tire pressure label may be incorrect, following accessory wheel installation. Dealers will inspect the Tire and Loading Information label for accuracy and install an overlay label as needed.
Amendments to the Song-Beverly Act (SBA) California warranty law provides vehicle owners with an opportunity to submit a written notice to GM before filing a lawsuit seeking a vehicle repurchase. If such a notice is not provided to GM, then the vehicle owner is prevented from…
Amendments to the Song-Beverly Act (SBA) California warranty law provides vehicle owners with an opportunity to submit a written notice to GM before filing a lawsuit seeking a vehicle repurchase. If such a notice is not provided to GM, then the vehicle owner is prevented from…
Customer Satisfaction Program. Certain vehicles may require software updates that improve the customer experience and optimize future over-the-air updates. Dealers will perform a comprehensive software update.
Certain 2023-2024 model year Chevrolet Colorado / Silverado 1500 and GMC Canyon / Sierra 1500 vehicles equipped with a 2.7L engine (RPO L3B), may have an Engine Control Module (ECM) that does not sufficiently control fuel injector flow rate under certain driving conditions. This…
Service Update. Certain vehicles listed above may have a condition in which the Engine Control Module (ECM) does not sufficiently control fuel injector flow rate under certain driving conditions. Dealers are to reprogram the ECM.
Certain models listed above may have a condition in which the front camera module is inoperative after sitting in cold weather. Dealers will replace the front camera module.
Customer Satisfaction Program. Certain vehicles may require software updates that improve the customer experience and optimize future over-the-air updates. Dealers will perform a comprehensive software update.
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The…
This service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
Most recent service bulletins
The 20 most recent of 630 communications on file. The complete set is searchable on NHTSA's page for this vehicle.
This PI states that if SDGM DTC P0604/P0607 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM. Advises of how to contact PQC to authorize SDGM replacement.
This document assists GM dealer technicians with diagnosing torque converter concerns to ensure torque converter replacement is necessary. The torque converter part number will be placed on order restriction, and the technician will be asked to follow 25-NA-148 before requesting…
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently investigating.
This PI communicates diagnostic information to assist Technicians with a possible transmission shudder
This PI provides diagnostic tips for diagnosing electric trailer brakes issues.
PI to help diagnose A/C concern
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and how to reset/clear the message.
This PI advises dealers that if the K160 Brake System Control Module sets DTC P0606 along with P0562 and/or P25A2, additional diagnostic aids should be followed before replacing parts. The PI provides guidance to inspect for low voltage conditions, wiring, terminal concerns, and…
This PI provides diagnostic steps for dealer technicians to verify the condition and ensure that part replacement is necessary
This PI advises dealers that if DTC P0606 and/or P0607 are set in the K160 EBCM, additional diagnostic aids should be followed to ensure the module requires replacement
This preliminary information is to inform technicians and customers that the voice command will be inoperative when trying to open applications. Engineering is investigating and this PI will be converted to a bulletin when a repair is available.
This Preliminary information communicates to dealership technicians that if they encounter a customer vehicle with this concern, to perform the steps listed and should be able to reprogram the module and correct this.
The document advise technicians after an engine repair involving removal of the camshaft actuators, the vehicle may set p1101 P0172 and or stalls when taken off idle. The technician is instructed to verify the intake and exhaust camshaft actuators are installed onto the correct…
This PI provides diagnostic tips for diagnosing electric trailer brakes issues.
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
Pi created to provide GM dealers with information on gathering information for projection issue
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI states that if SDGM DTC P0604/P0607 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM. Advises of how to contact PQC to authorize SDGM replacement.
This Preliminary information communicates to dealership technicians to perform the reset for the 2 modules noted above.
Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.