2013 BMW X5 TSBs
271 manufacturer communications for the 2013 BMW X5 sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2013 X5 problem report covers complaints, recalls, and investigations.
What the bulletins cover
Warranty extensions, campaigns & software updates
Worth checking your VIN against — these can mean free or reimbursed work if your vehicle qualifies.
The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 186,000 miles as determined from the original first in-service / delivery date.
This bulletin outlines the Customer Care Package program that has been designed exclusively for BMWvehicles with the N63 engine. Vehicles with the N63 high performance engine are engineered with EfficientDynamics that provides fueleconomy without compromising on its “class…
The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 186,000 miles as determined from the original first in-service / delivery date.
The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 240,000 miles as determined from the original first in-service / delivery date.
Most recent service bulletins
The 20 most recent of 271 communications on file. The complete set is searchable on NHTSA's page for this vehicle.
The basic conditions for initializing the power windows are not met.
The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged…
Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (-…
Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicle’s equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red…
Second seat row blocking access to third seat row, program seat modules. Visible stitching on first row sport seat. Third seat row backrest Bowden cable routing and length change.
Various functions of the camera-based driver assistance systems (ADCAM system) can lead to customer complaints.
This situation can result in two customer complaints: 1. Wind noise 2. Excess water entry
Coolant is leaking from under the car which is equipped with the S63 engine. A low coolant warning might also be displayed (CC Message ID166).
The driver's side (left rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
When returning the 2nd row seat 60% (left) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked.
When returning the 2nd row seat 40% (right) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked. The passenger's side (right rear 40% seat) of the 60/40…
The passenger's side (right rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
The front sunroof glass seal has shrunk, creating a gap which can cause wind noise or excess water entry.
Customer is unable to power up or charge accessories through a plug adapter inserted in the front 12-volt power socket plug. Alternatively, it will only operate when constant downward hand pressure is maintained.
Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
Driver Assistance reduced checked control message (CCM) appears. All or some of the system functions maybe inoperative. The following fault will be stored: 481CC6.
The fuel gauge may indicate the incorrect fuel level (full and reserve).
A check control message for the restraint system appears. In the Instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal;…
Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, "N63 Customer Care Package." The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They…
Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.