2018 Audi Q7 TSBs
1,070 manufacturer communications for the 2018 Audi Q7 sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2018 Q7 problem report covers complaints, recalls, and investigations.
What the bulletins cover
Warranty extensions, campaigns & software updates
Worth checking your VIN against — these can mean free or reimbursed work if your vehicle qualifies.
Diagnosed and confirmed malfunction of the vehicle’s AEB system that resulted from failure or malfunction of the AEB system’s control unit, camera(s), LIDAR, and/or sensor(s) which enable automatic emergency braking functionality.
Diagnosed and confirmed malfunction of the vehicle’s AEB system that resulted from failure or malfunction of the AEB system’s control unit, camera(s), LIDAR, and/or sensor(s) which enable automatic emergency braking functionality.
Most recent service bulletins
The 20 most recent of 1,070 communications on file. The complete set is searchable on NHTSA's page for this vehicle.
This bulletin provides a statement regarding the bottleneck of supply for VW approved oil types VW 504.00 and VW 507.00.
This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.
This service information TSB provides warranty coverage information for vehicles with a broken sunroof panel.
This bulletin provides information when there is a film/visible rings on the clear glass cover of the headlight when the dipped beam is switched on.
This bulletin provides informatoinw hent here are scratches or a coating on the cover of the instrument cluster, or particles inside of the housing.
This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.
This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.
This bulletin provides informationwhen noises/vibration are detected from front of vehicle in dynamic mode.
This bulletin provides information when there are noises from the area around the instrument cluster.
This bulleti provides informaiton when there is a booming noise or a wind noise from the vehicle underbody.
This bulletin provides information when DTC C129700 is logged in diagnostic address 00D4 and/or 00D5.
This bulletin provides informaiton when the engine is not running smoothly, misfiring.
This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
This bulletin provides information when DTC U140A00 Terminal 30 is stored in the ECM.
This bulletin provides informatio when fuel pump/ sender, fuel tank level implausible, DTC B105A1A B103E29 Stored in 0017.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: A software fix is needed to correct the issue: The ODIS Audi Brand update 2.41.1 is setting a ODS5003E error code when you perform the 90TV…
This bulletin provides informaiotn when the starter battery is discharged or defective.
The high-voltage batteries in electric vehicles are subject to various ageing effects which could lead to the energy content (energy density) being reduced. This reduction in the energy content, which is due to factors. Revised header. Added Model years
This bulletin provides diagnostic information for the vehicle locking system.
This bulletin provides informaiotn when the starter battery is discharged or defective.
Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.