2019 Acura TLX TSBs
66 manufacturer communications for the 2019 Acura TLX sit in NHTSA's public file. A TSB is factory repair guidance, not a recall — the repair is not automatically free. The 2019 TLX problem report covers complaints, recalls, and investigations.
What the bulletins cover
Most recent service bulletins
The 20 most recent of 66 communications on file. The complete set is searchable on NHTSA's page for this vehicle.
Service Bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and…
Service Bulletin - The AWD warning light is on with one or more AWD DTCs having been set due to water intrusion into the electric oil pump motor connector area corrodes the terminals.
Service Bulletin - The AWD warning light is on potentially due to water intrusion into the rear differential pump motor connector area that corrodes the terminals.
Service News - Due to On-Board Diagnostic (OBD) regulation change starting with 2019 vehicles, American Honda’s Variable Valve Timing and Lift Electronic Control (VTEC) On-Board Diagnostic monitors are now included in the EGR/VVT OBD Monitor Readiness status group. Due to some…
Service Bulletin - The MIL comes on during vehicle operation due to variations in the purge control solenoid valve spring, the valve wears unevenly and intermittently sticks. This may result in setting DTC P0441 (Evaporative Emission (EVAP) System Purge Flow Malfunction).
Service Bulletin - Due to variations in the purge control solenoid valve spring, the valve wears unevenly and intermittently sticks. This may result in setting DTC P0441 (Evaporative Emission (EVAP) System Purge Flow Malfunction).
Owner Notification Letter - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Acura is providing a product update with new PGM-FI software update to fix this issue.
Service Bulletin - The engine will not crank on the initial startup attempt after the vehicle has been exposed to precipitation and then freezing temperatures. Water can enter the starter motor. In cold temperatures the water can freeze, preventing the starter motor from…
Service Bulletin - (Repair Procedure Revision) Due to swelling of the fuel pump motor impeller, the fuel pump may seize and stop working. If this occurs, the check engine light may be displayed with DTC P0087 (Fuel Rail Pressure Too Low) stored, the engine may not start, or the…
Service Bulletin - (Repair Procedure Revision) Due to swelling of the fuel pump motor impeller, the fuel pump may seize and stop working. If this occurs, the check engine light may be displayed with DTC P0087 (Fuel Rail Pressure Too Low) stored, the engine may not start, or the…
"Customer letter - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. To ensure your confidence in your vehicle. Acura is extending the warranty coverage for starter and starter relays and a valve…
"Customer letter - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Acura is providing a product update with new PGM-FI software update to fix this issue. In addition, to ensure your confidence in…
American Honda Motor Co., Inc. (AHM) is searching for certain 2016-2020 MDXs, RLXs & TLXs with a client complaint of the Malfunction Indicator Light (MIL) on with the DTC P030X (Cylinder Misfire Detected), P0171 & P0174 (Rear/Front Bank Fuel System Too Lean), or P219A&B…
Dealer message - American Honda Motor Co., Inc. (AHM) is searching for certain 2016-2020 MDXs, RDXs & TLXs with a client complaint of the Malfunction Indicator Light (MIL) on with the DTC P030X (Cylinder Misfire Detected), P0171 & P0174 (Rear/Front Bank Fuel System Too Lean), or…
Service bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and…
Service bulletin - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Typically, the customer can immediately restart the vehicle by selecting Park and pushing the ENGINE START/STOP button.
Tech line summary article - Clients are experiencing multiple warning lights coming on with DTC C1600-94 (Precision All Wheel Steer System Unexpected Operation). You need to do an all DTC check. If you can duplicate and related codes are present, follow the appropriate…
"Dealer message - Today, March 30, 2022, Acura is announcing a product update and warranty extension for certain 2015-2020 TLX vehicles to update the PGM-FI software that may affect the idle stop operation and starter under certain conditions. Acura is extending the warranty…
"Service bulletin - Under certain circumstances, after coming to a stop and the idle stop feature engages, the vehicle may not automatically restart. Typically, the customer can immediately restart the vehicle by selecting Park and pushing the ENGINE START/STOP button."
"Service bulletin - Under certain circumstances, after coming to a stop and engaging idle stop the vehicle may not restart automatically due to excessive cylinder pressure and/or low cranking torque. Typically, the client can immediately restart the vehicle by selecting Park and…
Every number on this page is a count of records in the federal complaint, recall, and investigation files published by NHTSA's Office of Defects Investigation. Check any specific vehicle's open recalls by VIN at nhtsa.gov/recalls.